i2S corp. _{Innovative Imaging Solution}

The vacuum table is an accessory for perfectly flat positioning of all kinds of documents with paper that is wavy, crushed, folded or rolled. It covers every format up to A0 /E and has a usable surface of 840 x 1180 mm. It consists of a honeycombed plate and two vacuum arms linked to two turbines. These can placed at a distance of 5 meters from one another and positioned in a close and isolated room, to minimize noise disturbance to the operator.

The vacuum power is adjustable and no overlaid transparent Mylar is necessary to perfectly hold down small format documents. The vacuum is controlled by a footswitch.

To improve operator comfort further, the DigiBook A0 software has a rotation setting for the digitized document, to better deskew it in the horizontal and vertical axes.

These two positions (vacuuming and rotation) lead to considerable time savings in document positioning before digitisation.

The vacuum table option is adapted to the A0 scanner and is installed on a wheel table for ease of use.

General Characteristics:

• Accepted formats: up to A0 / E
• Useful surface: 840 x 1180 mm
• Honeycombed plate with 2 vacuum arms linked to 2 turbines
• Maximum vacuum arm length: 5 meters
• Plate on a wheeled table with adjustable height
• Vacuum power adjustable
• Footswitch control
• Dimensions : 880 (D) x 1228 (W) x 60 (H) mm
• Electrical power: 2.2 KW

References:
TABLE ASPI (220 V)
TABLE ASPI110 (110 V)